On the shelf ready to ship!
Freshly rebuilt Yamaha Viking 700 powerplant.
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
This engine ships for free but must go FREIGHT. To ship it freight you must have a Commercial Business address to ship it to. The Commercial Business address must have a loading dock or a way to unload the package.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-V700-1416
Sophia White (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Henry Garcia (verified owner) –
I recently got my hands on a frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Henry Wilson (verified owner) –
Just tried out the cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Liam Thompson (verified owner) –
Finally replaced my old transmitter and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Mason Thompson (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Emma Thomas (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Sophia Rodriguez (verified owner) –
Finally replaced my old antenna and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Liam Davis (verified owner) –
Upgraded to this receiver and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Olivia Garcia (verified owner) –
After testing the cooling fan and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Harper Williams (verified owner) –
Finally replaced my old flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Noah Johnson (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Emma Thomas (verified owner) –
Finally replaced my old motor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. It saved my drone from a total rebuild.
Amelia Johnson (verified owner) –
Decided to give this charger and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Ava Hernandez (verified owner) –
I recently got my hands on a propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Evelyn Johnson (verified owner) –
This might be the best FPV camera and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Henry Davis (verified owner) –
Finally replaced my old LED light strip and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
James Rodriguez (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Mason Thompson (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Olivia Hernandez (verified owner) –
After testing the LED light strip and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Harper Johnson (verified owner) –
Disappointed in the flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Evelyn Hernandez (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Mason Rodriguez (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Noah Martinez (verified owner) –
This might be the best barometer and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.