On the shelf ready to ship!
Freshly rebuilt Suzuki Quad Master Arctic Cat 500 Automatic 00-01 powerplant.
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
This engine ships for free but must go FREIGHT. To ship it freight you must have a Commercial Business address to ship it to. The Commercial Business address must have a loading dock or a way to unload the package. PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-LT-A500-0001
Olivia Hernandez (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Sophia Davis (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Logan Davis (verified owner) –
Just tried out the charger and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Olivia Williams (verified owner) –
Swapped in a fresh navigation light and took it out for a spin. There were some minor issues, but overall it’s a decent option. Will be sticking with this brand from now on.
Isabella Williams (verified owner) –
Just tried out the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Ava Thompson (verified owner) –
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Sophia Johnson (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Isabella Taylor (verified owner) –
This might be the best navigation light and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Mason Rodriguez (verified owner) –
Decided to give this power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Ava Anderson (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Might look for a higher-end version next time.
Logan Rodriguez (verified owner) –
Had my doubts about this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Liam Moore (verified owner) –
Upgraded to this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Logan Martinez (verified owner) –
Been flying with a new barometer and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Mason Williams (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Isabella Martin (verified owner) –
Disappointed in the GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Ava Thompson (verified owner) –
This might be the best power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Noah Martinez (verified owner) –
After testing the battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Ava Garcia (verified owner) –
Had my doubts about this altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Elijah Hernandez (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Logan Wilson (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Olivia Martin (verified owner) –
Honestly surprised by this altimeter and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Amelia Miller (verified owner) –
Had my doubts about this heat sink and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Liam Moore (verified owner) –
I recently got my hands on a camera mount and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. A must-have if you’re into serious aerial work.