Freshly rebuilt Polaris Ranger Crew XP 1000 17-18 HVAC Northstar Long Block powerplant.
Now comes with new intake boots.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2207365-LB
Isabella Williams (verified owner) –
Upgraded to this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
James Garcia (verified owner) –
Honestly surprised by this ESC and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Benjamin Martin (verified owner) –
Decided to give this flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
James Martinez (verified owner) –
Just tried out the gimbal and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Emma Wilson (verified owner) –
Decided to give this carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Ava Thomas (verified owner) –
Had my doubts about this heat sink and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Charlotte Rodriguez (verified owner) –
Had my doubts about this receiver and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Benjamin Hernandez (verified owner) –
Had my doubts about this flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. It saved my drone from a total rebuild.
Emma Miller (verified owner) –
Been flying with a new drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Elijah White (verified owner) –
This might be the best vibration dampener and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Mia Thompson (verified owner) –
Just tried out the cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Benjamin Thomas (verified owner) –
This might be the best charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Logan Miller (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Logan Davis (verified owner) –
Disappointed in the battery strap and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Mason Davis (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Evelyn Wilson (verified owner) –
Upgraded to this LED light strip and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Sophia Taylor (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Lucas Smith (verified owner) –
Had my doubts about this gimbal and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Elijah Martin (verified owner) –
Disappointed in the heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Olivia Davis (verified owner) –
Honestly surprised by this antenna and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Benjamin Martin (verified owner) –
Decided to give this charger and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Elijah Garcia (verified owner) –
Had my doubts about this heat sink and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Ava White (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.