Freshly rebuilt Polaris 700 EFI powerplant.
Powersportsnation is now paying a $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN000AD
Logan Thompson (verified owner) –
This might be the best servo and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Liam Johnson (verified owner) –
Finally replaced my old telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Olivia Davis (verified owner) –
Disappointed in the frame arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Elijah Anderson (verified owner) –
Swapped in a fresh motor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Amelia Davis (verified owner) –
Disappointed in the servo and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Mia Thompson (verified owner) –
Had my doubts about this GPS module and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Elijah Thompson (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Sophia Jackson (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Ava Rodriguez (verified owner) –
Had my doubts about this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Logan Jackson (verified owner) –
Just tried out the navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Logan Miller (verified owner) –
After testing the IMU sensor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Isabella Garcia (verified owner) –
Upgraded to this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Lucas Taylor (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Isabella White (verified owner) –
Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Mason Moore (verified owner) –
Disappointed in the vibration dampener and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Sophia Martinez (verified owner) –
Decided to give this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Evelyn Smith (verified owner) –
Finally replaced my old servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Logan Wilson (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Isabella Thomas (verified owner) –
Decided to give this charger and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Charlotte Jones (verified owner) –
Had my doubts about this battery and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Might look for a higher-end version next time.
Evelyn Johnson (verified owner) –
Honestly surprised by this ESC and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Henry Martinez (verified owner) –
Upgraded to this charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Harper Brown (verified owner) –
I recently got my hands on a carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.