Freshly rebuilt Polaris Ranger 1000 XP HVAC 18-19 Long Block powerplant.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2207367-LB
Liam Davis (verified owner) –
Disappointed in the servo and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Logan Miller (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Isabella Thomas (verified owner) –
After testing the frame arm and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Evelyn Jackson (verified owner) –
Decided to give this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Mason Williams (verified owner) –
After testing the gimbal and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Olivia Davis (verified owner) –
Been flying with a new GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Olivia Thompson (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Henry Taylor (verified owner) –
Been flying with a new flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Ava Garcia (verified owner) –
Upgraded to this servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Mason Anderson (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Elijah Rodriguez (verified owner) –
Swapped in a fresh barometer and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Noah Johnson (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Amelia Davis (verified owner) –
This might be the best frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
James Garcia (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Mia Martin (verified owner) –
After testing the gimbal and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Lucas Davis (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Mia Martinez (verified owner) –
Swapped in a fresh telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Amelia Taylor (verified owner) –
This might be the best vibration dampener and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Lucas Smith (verified owner) –
Had my doubts about this flight controller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Not sure I’d buy this again, but it does the job.
Liam Moore (verified owner) –
Just tried out the servo and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Just what I needed for a quick fix.
Isabella Taylor (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Mia Martin (verified owner) –
This might be the best IMU sensor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Emma Miller (verified owner) –
Honestly surprised by this gimbal and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.