Freshly rebuilt Polaris Ranger 1000 17 powerplant.
Powersportsnation is now paying $400 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2206547
Elijah Martin (verified owner) –
Disappointed in the antenna and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Amelia Davis (verified owner) –
Been flying with a new barometer and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Henry Jones (verified owner) –
Disappointed in the altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Sophia White (verified owner) –
After testing the carbon fiber prop and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Elijah Johnson (verified owner) –
Honestly surprised by this drone shell and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
James Martinez (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Henry Jones (verified owner) –
Finally replaced my old battery and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
Liam Brown (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Noah Moore (verified owner) –
Been flying with a new gimbal and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Harper Jackson (verified owner) –
Honestly surprised by this thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
Lucas Hernandez (verified owner) –
Just tried out the barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Charlotte Taylor (verified owner) –
Just tried out the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Charlotte Moore (verified owner) –
Finally replaced my old battery and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
Henry Garcia (verified owner) –
Finally replaced my old navigation light and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Sophia Anderson (verified owner) –
Just tried out the foldable arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Charlotte White (verified owner) –
Been flying with a new thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Harper Miller (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Benjamin Davis (verified owner) –
This might be the best frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Isabella Thomas (verified owner) –
Disappointed in the thrust stand and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Harper Rodriguez (verified owner) –
Had my doubts about this altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Charlotte Williams (verified owner) –
This might be the best navigation light and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Ava Thompson (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Sophia Thompson (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.