Freshly rebuilt Polaris Ranger 1000 SOHC 20-23 powerplant.
Now comes with new intake boots.
Powersportsnation is now paying $400 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2208322
Noah Thomas (verified owner) –
Decided to give this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Charlotte Williams (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Evelyn Brown (verified owner) –
This might be the best charger and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Henry Taylor (verified owner) –
I recently got my hands on a FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Harper Brown (verified owner) –
Finally replaced my old carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Olivia Wilson (verified owner) –
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Sophia Taylor (verified owner) –
Honestly surprised by this flight controller and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Sophia Garcia (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Isabella Miller (verified owner) –
This might be the best heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Ava Thompson (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Amelia Thompson (verified owner) –
Swapped in a fresh battery and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Noah Moore (verified owner) –
Finally replaced my old drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Olivia Anderson (verified owner) –
Finally replaced my old GPS module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Isabella Taylor (verified owner) –
Disappointed in the GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Amelia Thomas (verified owner) –
This might be the best frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Henry Taylor (verified owner) –
Honestly surprised by this gimbal and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Logan Miller (verified owner) –
Disappointed in the frame arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Amelia Taylor (verified owner) –
Honestly surprised by this camera mount and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Harper Rodriguez (verified owner) –
Disappointed in the heat sink and took it out for a spin. There were some minor issues, but overall it’s a decent option. Will be sticking with this brand from now on.
Charlotte Martin (verified owner) –
Honestly surprised by this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Henry Wilson (verified owner) –
Finally replaced my old battery and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
Emma Thomas (verified owner) –
Disappointed in the motor and took it out for a spin. Really improved my drone’s handling and responsiveness. A must-have if you’re into serious aerial work.
Elijah Rodriguez (verified owner) –
Honestly surprised by this foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.