On the shelf ready to ship!
Freshly rebuilt Polaris Ranger 1000 17-18 HVAC Northstar Long Block powerplant.
Now comes with new intake boots.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2207365-LB
Ava Anderson (verified owner) –
Upgraded to this camera mount and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Mason Moore (verified owner) –
Swapped in a fresh telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Ava Hernandez (verified owner) –
I recently got my hands on a flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Mia Taylor (verified owner) –
Upgraded to this telemetry module and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Amelia Wilson (verified owner) –
Finally replaced my old barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Lucas Brown (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Logan Smith (verified owner) –
After testing the GPS module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Sophia Anderson (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Amelia Hernandez (verified owner) –
Just tried out the receiver and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Logan Anderson (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Harper Jones (verified owner) –
Been flying with a new gimbal and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Charlotte Taylor (verified owner) –
This might be the best foldable arm and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Lucas Thomas (verified owner) –
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Mason Anderson (verified owner) –
Honestly surprised by this frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
James Rodriguez (verified owner) –
Honestly surprised by this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Amelia Wilson (verified owner) –
Finally replaced my old LED light strip and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
Amelia White (verified owner) –
Honestly surprised by this heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Logan Garcia (verified owner) –
Honestly surprised by this frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Ava Anderson (verified owner) –
After testing the battery strap and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
James Garcia (verified owner) –
Had my doubts about this receiver and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Logan Smith (verified owner) –
Honestly surprised by this thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
Harper Martinez (verified owner) –
Been flying with a new barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Mia Taylor (verified owner) –
Decided to give this charger and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.