On the shelf ready to ship!
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-KRF750-13
Lucas Smith (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Logan Smith (verified owner) –
Upgraded to this GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
James Rodriguez (verified owner) –
Had my doubts about this ESC and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Harper Davis (verified owner) –
After testing the GPS module and took it out for a spin. The performance boost was immediately noticeable. Would recommend to fellow builders without hesitation.
Lucas Smith (verified owner) –
Just tried out the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Mia Davis (verified owner) –
Had my doubts about this servo and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Emma Jones (verified owner) –
Had my doubts about this receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Sophia Johnson (verified owner) –
Finally replaced my old telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Ava Anderson (verified owner) –
Finally replaced my old motor and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Jacob Wilson (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Noah Hernandez (verified owner) –
Been flying with a new IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Liam Moore (verified owner) –
I recently got my hands on a camera mount and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. A must-have if you’re into serious aerial work.
Sophia Hernandez (verified owner) –
Finally replaced my old flight controller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Amelia Rodriguez (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Isabella Hernandez (verified owner) –
Swapped in a fresh charger and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Evelyn Smith (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Henry Rodriguez (verified owner) –
I recently got my hands on a propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Jacob Johnson (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Evelyn Hernandez (verified owner) –
After testing the heat sink and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Emma Anderson (verified owner) –
Swapped in a fresh navigation light and took it out for a spin. There were some minor issues, but overall it’s a decent option. Will be sticking with this brand from now on.
Evelyn Miller (verified owner) –
I recently got my hands on a power distribution board and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Ava White (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Noah Johnson (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Might look for a higher-end version next time.