On the shelf ready to ship!
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only.
Part Number:
PSN0100-KP3604-0306
Henry Rodriguez (verified owner) –
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Harper Thomas (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Logan Garcia (verified owner) –
Decided to give this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Olivia Miller (verified owner) –
Upgraded to this barometer and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Evelyn Smith (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Benjamin Johnson (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Benjamin Garcia (verified owner) –
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Elijah Davis (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Sophia Thomas (verified owner) –
After testing the GPS module and took it out for a spin. The performance boost was immediately noticeable. Would recommend to fellow builders without hesitation.
Mia Martin (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Harper Garcia (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Charlotte White (verified owner) –
Had my doubts about this GPS module and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Isabella Miller (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Sophia Johnson (verified owner) –
Honestly surprised by this battery and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Evelyn Martin (verified owner) –
Had my doubts about this receiver and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Jacob Garcia (verified owner) –
Honestly surprised by this FPV camera and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Amelia Wilson (verified owner) –
After testing the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Amelia Garcia (verified owner) –
After testing the battery strap and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Jacob Miller (verified owner) –
After testing the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Emma Wilson (verified owner) –
This might be the best receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Logan Garcia (verified owner) –
Disappointed in the camera mount and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
James Jones (verified owner) –
Been flying with a new drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Amelia Rodriguez (verified owner) –
Upgraded to this barometer and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.