Freshly rebuilt Kawasaki Mule 3000/3010/3020 KAF620 powerplant.
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-KM3010-0108
Elijah Garcia (verified owner) –
Been flying with a new receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Charlotte Thomas (verified owner) –
This might be the best cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Henry Smith (verified owner) –
Finally replaced my old servo and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Lucas Martin (verified owner) –
Upgraded to this gimbal and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Lucas Wilson (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Noah White (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Noah Thomas (verified owner) –
After testing the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Liam Martinez (verified owner) –
Upgraded to this heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Olivia Anderson (verified owner) –
Had my doubts about this ESC and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Sophia Davis (verified owner) –
Swapped in a fresh charger and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Olivia Hernandez (verified owner) –
Upgraded to this barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Sophia White (verified owner) –
Disappointed in the servo and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Sophia Thompson (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Jacob Wilson (verified owner) –
Honestly surprised by this ESC and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Jacob Garcia (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Evelyn Jones (verified owner) –
I recently got my hands on a navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Logan Jackson (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Mason Rodriguez (verified owner) –
Upgraded to this cooling fan and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Noah Williams (verified owner) –
Upgraded to this servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Noah Martin (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Jacob Garcia (verified owner) –
Upgraded to this battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Benjamin Johnson (verified owner) –
Finally replaced my old battery strap and took it out for a spin. There were no compatibility issues with my existing build. Just what I needed for a quick fix.
Lucas Moore (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.