On the shelf ready to ship!
Freshly rebuilt Honda Foreman 520 powerplant with automatic transmission.
Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-FR520FA-2022
Jacob Wilson (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Mia Taylor (verified owner) –
Had my doubts about this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Jacob Garcia (verified owner) –
Been flying with a new GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Noah Martinez (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Amelia Taylor (verified owner) –
Upgraded to this LED light strip and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Harper Miller (verified owner) –
This might be the best LED light strip and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Logan Williams (verified owner) –
Had my doubts about this GPS module and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Noah Taylor (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Harper Jackson (verified owner) –
Been flying with a new thrust stand and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Liam Martinez (verified owner) –
Swapped in a fresh ESC and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Emma White (verified owner) –
This might be the best receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Isabella Moore (verified owner) –
Just tried out the gimbal and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Logan Anderson (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Ava Thompson (verified owner) –
Had my doubts about this heat sink and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Henry Smith (verified owner) –
Finally replaced my old drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Lucas Thompson (verified owner) –
This might be the best GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Benjamin Thomas (verified owner) –
Been flying with a new barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Will be sticking with this brand from now on.
Henry Taylor (verified owner) –
Decided to give this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Elijah Jackson (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Isabella Garcia (verified owner) –
I recently got my hands on a flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Benjamin Anderson (verified owner) –
Been flying with a new GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Amelia Thomas (verified owner) –
This might be the best barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Henry Taylor (verified owner) –
Been flying with a new thrust stand and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.