On the shelf ready to ship!
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR500L
Isabella Hernandez (verified owner) –
Finally replaced my old propeller and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Harper Thomas (verified owner) –
Upgraded to this receiver and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Amelia Hernandez (verified owner) –
This might be the best battery and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Harper Thompson (verified owner) –
Decided to give this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Logan Thompson (verified owner) –
Upgraded to this cooling fan and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Charlotte Jones (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Mason Jones (verified owner) –
Disappointed in the flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Jacob Moore (verified owner) –
Just tried out the GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Benjamin Williams (verified owner) –
Finally replaced my old power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Logan Anderson (verified owner) –
This might be the best foldable arm and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
James Jackson (verified owner) –
Had my doubts about this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Elijah Anderson (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Lucas Rodriguez (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Benjamin Martin (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Mason Wilson (verified owner) –
Just tried out the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Mia Martinez (verified owner) –
Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Mia Rodriguez (verified owner) –
Had my doubts about this vibration dampener and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Benjamin Jones (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Liam Anderson (verified owner) –
Had my doubts about this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Benjamin Hernandez (verified owner) –
Just tried out the power distribution board and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Benjamin Anderson (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Sophia Garcia (verified owner) –
Disappointed in the carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Mia Thompson (verified owner) –
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Amelia Davis (verified owner) –
This might be the best receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Emma Wilson (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Amelia White (verified owner) –
Finally replaced my old motor and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Charlotte Williams (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Logan Martinez (verified owner) –
Decided to give this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Lucas Thompson (verified owner) –
Had my doubts about this barometer and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Henry Taylor (verified owner) –
Upgraded to this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Liam Anderson (verified owner) –
Swapped in a fresh motor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Evelyn Hernandez (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Harper White (verified owner) –
Swapped in a fresh telemetry module and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.
Isabella Jones (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Olivia Rodriguez (verified owner) –
Swapped in a fresh propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Olivia White (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Elijah Johnson (verified owner) –
Had my doubts about this antenna and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Henry Johnson (verified owner) –
Had my doubts about this battery and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Might look for a higher-end version next time.
Harper White (verified owner) –
Had my doubts about this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Harper Thomas (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Lucas Brown (verified owner) –
Decided to give this power distribution board and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Harper Thomas (verified owner) –
Disappointed in the LED light strip and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Liam Garcia (verified owner) –
After testing the cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Logan Rodriguez (verified owner) –
Finally replaced my old navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Mia Thompson (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Noah White (verified owner) –
Disappointed in the cooling fan and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.