Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR500E
Ava Jackson (verified owner) –
Finally replaced my old motor and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Harper Wilson (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
James Jones (verified owner) –
Finally replaced my old flight controller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Mason Miller (verified owner) –
Just tried out the landing gear and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Benjamin Rodriguez (verified owner) –
Decided to give this camera mount and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Will be sticking with this brand from now on.
Isabella Moore (verified owner) –
Decided to give this carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Amelia Davis (verified owner) –
Upgraded to this telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Elijah Brown (verified owner) –
Been flying with a new receiver and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Logan Martin (verified owner) –
Been flying with a new barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Will be sticking with this brand from now on.
Harper Taylor (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Olivia Jackson (verified owner) –
Been flying with a new thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Sophia Williams (verified owner) –
This might be the best frame arm and took it out for a spin. There were no compatibility issues with my existing build. Just what I needed for a quick fix.
Benjamin Davis (verified owner) –
Finally replaced my old drone shell and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Elijah White (verified owner) –
Just tried out the transmitter and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Henry Taylor (verified owner) –
Honestly surprised by this camera mount and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Liam Johnson (verified owner) –
Swapped in a fresh telemetry module and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.
Liam Davis (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Mason White (verified owner) –
Decided to give this camera mount and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Will be sticking with this brand from now on.
Benjamin Martinez (verified owner) –
This might be the best ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Harper Davis (verified owner) –
Disappointed in the servo and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Logan Moore (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Harper Jackson (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Mason Moore (verified owner) –
Just tried out the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.