Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-MUV700-0913
Lucas Williams (verified owner) –
Upgraded to this charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Emma Anderson (verified owner) –
Had my doubts about this altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Lucas Wilson (verified owner) –
Been flying with a new GPS module and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Henry Johnson (verified owner) –
Had my doubts about this servo and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
James Jackson (verified owner) –
Finally replaced my old FPV camera and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
James White (verified owner) –
Honestly surprised by this FPV camera and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Logan Moore (verified owner) –
Just tried out the gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Mia Williams (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Mason Miller (verified owner) –
Swapped in a fresh barometer and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Sophia Garcia (verified owner) –
Honestly surprised by this LED light strip and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Charlotte Rodriguez (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Emma Brown (verified owner) –
After testing the IMU sensor and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Noah Martinez (verified owner) –
Decided to give this power distribution board and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Jacob Moore (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Evelyn Smith (verified owner) –
This might be the best heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Elijah Martinez (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Mason Davis (verified owner) –
Honestly surprised by this carbon fiber prop and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Olivia Martin (verified owner) –
After testing the gimbal and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Henry Martinez (verified owner) –
After testing the frame arm and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Mia Anderson (verified owner) –
I recently got my hands on a barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. It saved my drone from a total rebuild.
Isabella Williams (verified owner) –
Just tried out the drone shell and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Amelia Miller (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Harper White (verified owner) –
Upgraded to this vibration dampener and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.