Freshly rebuilt Can-Am Outlander 1000 16-23 powerplant- also fits Renegade 1000 16-23.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-420101015
Sophia Hernandez (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Emma Taylor (verified owner) –
Upgraded to this thrust stand and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Charlotte Hernandez (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Liam Martin (verified owner) –
Swapped in a fresh ESC and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Sophia Johnson (verified owner) –
Decided to give this vibration dampener and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Logan Thompson (verified owner) –
Decided to give this flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
James Garcia (verified owner) –
Decided to give this vibration dampener and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Charlotte Thomas (verified owner) –
Decided to give this propeller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Sophia Anderson (verified owner) –
Swapped in a fresh motor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Ava Anderson (verified owner) –
Honestly surprised by this ESC and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Olivia Miller (verified owner) –
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Harper Martinez (verified owner) –
Finally replaced my old servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Olivia Hernandez (verified owner) –
Upgraded to this gimbal and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Mason Wilson (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Mia Taylor (verified owner) –
Had my doubts about this gimbal and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Evelyn Hernandez (verified owner) –
This might be the best charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Liam Williams (verified owner) –
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Olivia Williams (verified owner) –
Finally replaced my old antenna and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Emma Rodriguez (verified owner) –
Just tried out the foldable arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
James Jones (verified owner) –
Disappointed in the antenna and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Mia Martin (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Logan Jackson (verified owner) –
Swapped in a fresh telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Evelyn Jones (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.