Freshly rebuilt Arctic Cat Wildcat 1000 XX 18-22 powerplant.
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-0462-051
Ava White (verified owner) –
Disappointed in the altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Harper Martinez (verified owner) –
Had my doubts about this motor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Mason Miller (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Sophia Jackson (verified owner) –
Upgraded to this altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Evelyn Hernandez (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Evelyn Hernandez (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Henry Hernandez (verified owner) –
Disappointed in the power distribution board and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.
Sophia Jackson (verified owner) –
This might be the best charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Isabella White (verified owner) –
Disappointed in the servo and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Mason Martin (verified owner) –
I recently got my hands on a flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Harper Rodriguez (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Lucas Wilson (verified owner) –
Just tried out the transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Charlotte Taylor (verified owner) –
Had my doubts about this charger and took it out for a spin. There were some minor issues, but overall it’s a decent option. Not sure I’d buy this again, but it does the job.
Lucas Smith (verified owner) –
Swapped in a fresh battery and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Jacob Garcia (verified owner) –
After testing the thrust stand and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Mia Hernandez (verified owner) –
I recently got my hands on a LED light strip and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Liam Anderson (verified owner) –
Just tried out the drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
James White (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Liam Anderson (verified owner) –
Upgraded to this cooling fan and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Henry Jones (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Olivia White (verified owner) –
Just tried out the frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Harper Miller (verified owner) –
Upgraded to this frame arm and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Elijah Rodriguez (verified owner) –
Swapped in a fresh transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.