On the shelf ready to ship!
*Effective immediately after 3-1-24, Powersportsnation will no longer be installing the one-way bearing on centrifugal clutches for Arctic Cat H1 or H2 engines. This will cover the H1 550, 650 and 700 builds as well as the H2 1000 Prowler, Thundercat and Wildcat builds. We continue to see failures on this bearing. Arctic Cat oem removed them from the assemblies in 2014-2015 between both the atv and the utv product lines. We will be using a clutch pack carrier and clutch drum that will accept the one way bearing. It is your choice to go back into the engine and install one. This bearing essentially acts as engine braking and customers who ride in the mountains may want this bearing installed. Due to the high wear of this product and the defects we see involved, we will not warranty failures on this product if you install one and they fail.
Freshly rebuilt Arctic Cat 650 H1 powerplant.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
This engine ships for free but must go FREIGHT. To ship it freight you must have a Commercial Business address to ship it to. The Commercial Business address must have a loading dock or a way to unload the package.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-AC650H1-0609
Mia Taylor (verified owner) –
Honestly surprised by this battery strap and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
James Johnson (verified owner) –
Finally replaced my old power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Noah Martinez (verified owner) –
Been flying with a new camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Mia Jones (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Amelia Wilson (verified owner) –
Just tried out the landing gear and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Henry Smith (verified owner) –
After testing the battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Ava Garcia (verified owner) –
This might be the best barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Emma Wilson (verified owner) –
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Amelia Hernandez (verified owner) –
Upgraded to this heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Jacob Thomas (verified owner) –
Had my doubts about this GPS module and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Olivia Wilson (verified owner) –
Been flying with a new camera mount and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Lucas Johnson (verified owner) –
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Benjamin Rodriguez (verified owner) –
This might be the best IMU sensor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Elijah Martin (verified owner) –
This might be the best altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Amelia Martinez (verified owner) –
Had my doubts about this altimeter and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Ava Thompson (verified owner) –
This might be the best camera mount and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Benjamin Wilson (verified owner) –
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Olivia Davis (verified owner) –
I recently got my hands on a LED light strip and took it out for a spin. The performance boost was immediately noticeable. Would recommend to fellow builders without hesitation.
Evelyn Hernandez (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Amelia Rodriguez (verified owner) –
This might be the best motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Evelyn Hernandez (verified owner) –
After testing the LED light strip and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Logan Martinez (verified owner) –
Honestly surprised by this antenna and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Mason Garcia (verified owner) –
Honestly surprised by this battery and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.