*Effective immediately after 3-1-24, Powersportsnation will no longer be installing the one-way bearing on centrifugal clutches for Arctic Cat H1 or H2 engines. This will cover the H1 550, 650 and 700 builds as well as the H2 1000 Prowler, Thundercat and Wildcat builds. We continue to see failures on this bearing. Arctic Cat oem removed them from the assemblies in 2014-2015 between both the atv and the utv product lines. We will be using a clutch pack carrier and clutch drum that will accept the one way bearing. It is your choice to go back into the engine and install one. This bearing essentially acts as engine braking and customers who ride in the mountains may want this bearing installed. Due to the high wear of this product and the defects we see involved, we will not warranty failures on this product if you install one and they fail.
Freshly rebuilt Arctic Cat H1 700 ATV (13-15) powerplant.
Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
This engine ships for free but must go FREIGHT. To ship it freight you must have a Commercial Business address to ship it to. The Commercial Business address must have a loading dock or a way to unload the package.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-0800-175
Amelia Miller (verified owner) –
Honestly surprised by this charger and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Harper Jones (verified owner) –
This might be the best camera mount and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Emma Garcia (verified owner) –
Honestly surprised by this heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Olivia Martin (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Noah Hernandez (verified owner) –
Finally replaced my old barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Emma Thomas (verified owner) –
Had my doubts about this GPS module and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Isabella Jones (verified owner) –
This might be the best altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Just what I needed for a quick fix.
Jacob Johnson (verified owner) –
Just tried out the power distribution board and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Amelia Johnson (verified owner) –
Been flying with a new camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Lucas Moore (verified owner) –
Disappointed in the motor and took it out for a spin. Really improved my drone’s handling and responsiveness. A must-have if you’re into serious aerial work.
Elijah Martinez (verified owner) –
This might be the best LED light strip and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Benjamin Davis (verified owner) –
Disappointed in the cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Evelyn Anderson (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Emma Smith (verified owner) –
Been flying with a new thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Olivia Smith (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Mason Wilson (verified owner) –
Been flying with a new GPS module and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Emma Anderson (verified owner) –
I recently got my hands on a navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Amelia Miller (verified owner) –
This might be the best LED light strip and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Noah Martinez (verified owner) –
Had my doubts about this ESC and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Mason Anderson (verified owner) –
Disappointed in the altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Noah Davis (verified owner) –
Just tried out the servo and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Just what I needed for a quick fix.
Mia Jones (verified owner) –
Disappointed in the carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Charlotte Wilson (verified owner) –
Been flying with a new servo and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.