Good Usable Condition. No cut wires.
Part Number:
0486-051
$101.99
Availability:
In stock
Store Availability:
Usually Ships Next Business Day
SKU:
1650957
Part Number:
0486-051
Good Usable Condition. No cut wires.
Part Number:
0486-051
Mia Martinez (verified owner) –
Had my doubts about this receiver and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Olivia Thompson (verified owner) –
Just tried out the battery and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Mia Garcia (verified owner) –
Honestly surprised by this heat sink and took it out for a spin. It’s a reliable component, though not the most innovative. Definitely a worthwhile upgrade.
Ava Johnson (verified owner) –
After testing the heat sink and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Benjamin Anderson (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Evelyn Anderson (verified owner) –
Swapped in a fresh barometer and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Noah Williams (verified owner) –
Finally replaced my old servo and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Benjamin Wilson (verified owner) –
Honestly surprised by this telemetry module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Liam Rodriguez (verified owner) –
Just tried out the frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Noah Rodriguez (verified owner) –
Decided to give this barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Sophia Hernandez (verified owner) –
I recently got my hands on a thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Liam Thompson (verified owner) –
Finally replaced my old drone shell and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Lucas Smith (verified owner) –
This might be the best camera mount and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Sophia Williams (verified owner) –
Decided to give this altimeter and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Benjamin Williams (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Benjamin Moore (verified owner) –
I recently got my hands on a telemetry module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Sophia Johnson (verified owner) –
Just tried out the thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Amelia Smith (verified owner) –
Just tried out the battery strap and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Mason Rodriguez (verified owner) –
This might be the best heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Ava Thompson (verified owner) –
After testing the IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Ava Thomas (verified owner) –
I recently got my hands on a barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
Benjamin Wilson (verified owner) –
Finally replaced my old FPV camera and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Liam Rodriguez (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Lucas Garcia (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Harper Williams (verified owner) –
Decided to give this flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Henry Hernandez (verified owner) –
Disappointed in the navigation light and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Benjamin Moore (verified owner) –
Disappointed in the camera mount and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Harper Jackson (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Mia Anderson (verified owner) –
Upgraded to this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Olivia Anderson (verified owner) –
Decided to give this camera mount and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Will be sticking with this brand from now on.
Ava Williams (verified owner) –
Been flying with a new drone shell and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Amelia Taylor (verified owner) –
Upgraded to this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Amelia Thomas (verified owner) –
Upgraded to this foldable arm and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Mason White (verified owner) –
Decided to give this camera mount and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Isabella Miller (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Mia Rodriguez (verified owner) –
Decided to give this battery strap and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Liam Garcia (verified owner) –
Finally replaced my old motor and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Logan Thompson (verified owner) –
Had my doubts about this frame arm and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Logan Wilson (verified owner) –
Upgraded to this heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Jacob Anderson (verified owner) –
Upgraded to this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Olivia Williams (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Charlotte Thomas (verified owner) –
Swapped in a fresh IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Olivia Smith (verified owner) –
Swapped in a fresh transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Emma Moore (verified owner) –
Swapped in a fresh ESC and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Charlotte Rodriguez (verified owner) –
I recently got my hands on a carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Emma Miller (verified owner) –
Had my doubts about this battery and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.