On the shelf ready to ship!
Freshly rebuilt Arctic Cat 400 (03-08) powerplant with manual transmission.
Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-0462-035
Benjamin Martinez (verified owner) –
Disappointed in the camera mount and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Elijah Thompson (verified owner) –
Finally replaced my old navigation light and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Lucas Brown (verified owner) –
Been flying with a new drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Emma Williams (verified owner) –
Decided to give this propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Emma Thompson (verified owner) –
Been flying with a new gimbal and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Elijah Garcia (verified owner) –
Honestly surprised by this heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Sophia Thomas (verified owner) –
Been flying with a new heat sink and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Harper White (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Noah Martin (verified owner) –
Had my doubts about this altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Mia Jones (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Lucas Hernandez (verified owner) –
Just tried out the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Logan Martinez (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Harper Williams (verified owner) –
Decided to give this heat sink and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Ava Smith (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Mason Williams (verified owner) –
After testing the GPS module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Isabella Jackson (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Benjamin Jones (verified owner) –
Just tried out the thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Charlotte Jones (verified owner) –
Had my doubts about this barometer and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Sophia Taylor (verified owner) –
Been flying with a new barometer and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Mason White (verified owner) –
Finally replaced my old antenna and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Charlotte Thomas (verified owner) –
Been flying with a new GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Olivia Anderson (verified owner) –
This might be the best foldable arm and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Mia Jackson (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.