23 reviews for Arctic Cat 09 Prowler 650 XT Auto 4×4 Magneto Rotor Flywheel 0802-014
Rated 5 out of 5
Mia Williams (verified owner)–
Finally replaced my old drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Rated 5 out of 5
Henry Taylor (verified owner)–
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Rated 5 out of 5
Harper Martinez (verified owner)–
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Rated 3 out of 5
Harper Davis (verified owner)–
Decided to give this cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Rated 5 out of 5
Harper Thompson (verified owner)–
Just tried out the telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Rated 5 out of 5
Amelia Johnson (verified owner)–
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Rated 3 out of 5
Isabella Martin (verified owner)–
Swapped in a fresh receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Rated 3 out of 5
Amelia Thompson (verified owner)–
Had my doubts about this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Rated 5 out of 5
Benjamin Johnson (verified owner)–
Swapped in a fresh battery strap and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Rated 5 out of 5
Mason Wilson (verified owner)–
After testing the gimbal and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Rated 4 out of 5
Evelyn Hernandez (verified owner)–
This might be the best motor and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Rated 3 out of 5
Elijah Hernandez (verified owner)–
Finally replaced my old GPS module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Rated 5 out of 5
Mason Moore (verified owner)–
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Rated 5 out of 5
Logan Martin (verified owner)–
Swapped in a fresh vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Rated 3 out of 5
Olivia Martin (verified owner)–
Upgraded to this barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Rated 3 out of 5
Amelia Thompson (verified owner)–
I recently got my hands on a power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Rated 4 out of 5
Amelia Thompson (verified owner)–
Been flying with a new heat sink and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Rated 4 out of 5
Amelia Thomas (verified owner)–
After testing the IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Rated 4 out of 5
Mason Smith (verified owner)–
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Rated 3 out of 5
James Davis (verified owner)–
Had my doubts about this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Rated 5 out of 5
Emma Brown (verified owner)–
Honestly surprised by this heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Rated 4 out of 5
Isabella Rodriguez (verified owner)–
Disappointed in the GPS module and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Rated 5 out of 5
Evelyn Jackson (verified owner)–
Upgraded to this altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Mia Williams (verified owner) –
Finally replaced my old drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Henry Taylor (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Harper Martinez (verified owner) –
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Harper Davis (verified owner) –
Decided to give this cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Harper Thompson (verified owner) –
Just tried out the telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Amelia Johnson (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Isabella Martin (verified owner) –
Swapped in a fresh receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Amelia Thompson (verified owner) –
Had my doubts about this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Benjamin Johnson (verified owner) –
Swapped in a fresh battery strap and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Mason Wilson (verified owner) –
After testing the gimbal and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Evelyn Hernandez (verified owner) –
This might be the best motor and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Elijah Hernandez (verified owner) –
Finally replaced my old GPS module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Mason Moore (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Logan Martin (verified owner) –
Swapped in a fresh vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Olivia Martin (verified owner) –
Upgraded to this barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Amelia Thompson (verified owner) –
I recently got my hands on a power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Amelia Thompson (verified owner) –
Been flying with a new heat sink and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Amelia Thomas (verified owner) –
After testing the IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Mason Smith (verified owner) –
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
James Davis (verified owner) –
Had my doubts about this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Emma Brown (verified owner) –
Honestly surprised by this heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Isabella Rodriguez (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Evelyn Jackson (verified owner) –
Upgraded to this altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.