Freshly rebuilt Polaris 600 powerplant.
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2202361
Elijah Davis (verified owner) –
Been flying with a new heat sink and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Liam White (verified owner) –
Finally replaced my old servo and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Logan Miller (verified owner) –
This might be the best foldable arm and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Sophia Wilson (verified owner) –
Just tried out the carbon fiber prop and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Emma Williams (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Liam Johnson (verified owner) –
Had my doubts about this flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. It saved my drone from a total rebuild.
Mason White (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Definitely a worthwhile upgrade.
Amelia Jones (verified owner) –
Decided to give this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Benjamin Johnson (verified owner) –
This might be the best charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Evelyn Martin (verified owner) –
Decided to give this propeller and took it out for a spin. It’s a reliable component, though not the most innovative. Definitely a worthwhile upgrade.
Emma Wilson (verified owner) –
Just tried out the gimbal and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Ava Rodriguez (verified owner) –
Upgraded to this telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Jacob Wilson (verified owner) –
This might be the best frame arm and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Mason Williams (verified owner) –
Finally replaced my old telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Mason Miller (verified owner) –
Honestly surprised by this LED light strip and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Sophia Johnson (verified owner) –
Finally replaced my old motor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. It saved my drone from a total rebuild.
James White (verified owner) –
Honestly surprised by this foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Charlotte Smith (verified owner) –
Honestly surprised by this servo and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
James Martinez (verified owner) –
Decided to give this cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
James Wilson (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Noah Rodriguez (verified owner) –
Been flying with a new propeller and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Mason White (verified owner) –
After testing the foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
James Davis (verified owner) –
Finally replaced my old propeller and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. It saved my drone from a total rebuild.