Polaris RZR Rebuilt transmissions. Transmissions are completely disassembled. Cases are hot tanked or pressure washed. All parts are visibly inspected or measured for wear. All seals and chains are replaced. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed. All transmissions will come with one bottle of Polaris AGL transmission fluid. All our RZR transmissions will come with a 90 day warranty. The warranty will cover parts and or exchange for the 90 days. All RZR rebuilt transmissions are eligible for $100 back on your core. Free shipping to you on the rebuilt and free shipping back on the core. Thanks for your interest, Powersportsnation. *Many transmissions for Polaris RZRs have upgrade options available. Please call to check what options are available for your model. Current upgrades that we see requested are turf delete, HD reverse chain and gear reduction kits. Depending on the model, pricing will vary.*
Part Number:
PSN0200-1333063
Emma Thompson (verified owner) –
Finally replaced my old propeller and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. It saved my drone from a total rebuild.
Mia Davis (verified owner) –
This might be the best frame arm and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Evelyn Wilson (verified owner) –
This might be the best cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Benjamin Martinez (verified owner) –
Finally replaced my old flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Noah Moore (verified owner) –
Been flying with a new barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Will be sticking with this brand from now on.
Liam Rodriguez (verified owner) –
This might be the best motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Jacob Johnson (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Benjamin Moore (verified owner) –
After testing the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Harper White (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Liam Martinez (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Harper Miller (verified owner) –
Disappointed in the carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Amelia Martinez (verified owner) –
Honestly surprised by this servo and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Logan Wilson (verified owner) –
Decided to give this charger and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.
Isabella Taylor (verified owner) –
This might be the best foldable arm and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
James Davis (verified owner) –
Finally replaced my old barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Charlotte Hernandez (verified owner) –
Honestly surprised by this antenna and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Ava Hernandez (verified owner) –
Just tried out the frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Amelia Taylor (verified owner) –
Upgraded to this charger and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Logan Thompson (verified owner) –
Been flying with a new IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Mia Garcia (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Noah Miller (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Logan Anderson (verified owner) –
This might be the best altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Just what I needed for a quick fix.
Amelia White (verified owner) –
Honestly surprised by this gimbal and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.