On the shelf ready to ship!
Freshly rebuilt Polaris Ranger 1000 XP 18-20 Long Block powerplant.
Now comes with new intake boots.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-2207366-LB
Liam Martin (verified owner) –
Disappointed in the thrust stand and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Isabella White (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Sophia Wilson (verified owner) –
I recently got my hands on a heat sink and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Charlotte Moore (verified owner) –
After testing the IMU sensor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Mason Moore (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Sophia Williams (verified owner) –
After testing the frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Sophia Thompson (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Liam Brown (verified owner) –
Upgraded to this gimbal and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Liam Johnson (verified owner) –
Been flying with a new gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Harper Thomas (verified owner) –
Decided to give this motor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Isabella Martin (verified owner) –
Honestly surprised by this charger and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Ava Thomas (verified owner) –
After testing the antenna and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Mason Moore (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Amelia Thompson (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Evelyn Smith (verified owner) –
Just tried out the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Liam Anderson (verified owner) –
I recently got my hands on a power distribution board and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Sophia Taylor (verified owner) –
This might be the best LED light strip and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Elijah Davis (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Charlotte Smith (verified owner) –
Upgraded to this camera mount and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Lucas Moore (verified owner) –
Disappointed in the heat sink and took it out for a spin. There were some minor issues, but overall it’s a decent option. Will be sticking with this brand from now on.
Emma Wilson (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Noah Moore (verified owner) –
Finally replaced my old GPS module and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Olivia Rodriguez (verified owner) –
This might be the best vibration dampener and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.