On the shelf ready to ship!
Freshly rebuilt Honda Talon 1000 powerplant.
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HT1000-1921
Liam Rodriguez (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
James White (verified owner) –
Disappointed in the telemetry module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Logan Miller (verified owner) –
Upgraded to this charger and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Isabella Rodriguez (verified owner) –
Disappointed in the battery strap and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Mia Davis (verified owner) –
Honestly surprised by this ESC and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Mason Smith (verified owner) –
Just tried out the telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Mia Jackson (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Lucas Davis (verified owner) –
I recently got my hands on a antenna and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Lucas Garcia (verified owner) –
Finally replaced my old flight controller and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Will be sticking with this brand from now on.
James Jackson (verified owner) –
After testing the battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Logan Smith (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Benjamin Martin (verified owner) –
Upgraded to this charger and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Benjamin Anderson (verified owner) –
Been flying with a new propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Not sure I’d buy this again, but it does the job.
James Brown (verified owner) –
Upgraded to this frame arm and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Harper Williams (verified owner) –
Honestly surprised by this telemetry module and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Logan Anderson (verified owner) –
Just tried out the cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Henry Rodriguez (verified owner) –
I recently got my hands on a power distribution board and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Charlotte Thomas (verified owner) –
Just tried out the navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Harper Wilson (verified owner) –
Honestly surprised by this foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Noah Johnson (verified owner) –
Been flying with a new camera mount and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Isabella Miller (verified owner) –
Decided to give this camera mount and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Elijah Rodriguez (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Olivia Miller (verified owner) –
Swapped in a fresh gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Ava Thompson (verified owner) –
Just tried out the motor and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Charlotte Williams (verified owner) –
This might be the best thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Evelyn Johnson (verified owner) –
Disappointed in the altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Sophia Taylor (verified owner) –
Had my doubts about this barometer and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
James Rodriguez (verified owner) –
Decided to give this charger and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Harper Williams (verified owner) –
Had my doubts about this charger and took it out for a spin. There were some minor issues, but overall it’s a decent option. Not sure I’d buy this again, but it does the job.
Emma Williams (verified owner) –
Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Sophia White (verified owner) –
After testing the gimbal and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Emma Thompson (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Lucas Wilson (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Charlotte Smith (verified owner) –
Decided to give this propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Mason Thompson (verified owner) –
This might be the best battery strap and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Lucas Smith (verified owner) –
Been flying with a new GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Elijah Johnson (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Harper Brown (verified owner) –
Been flying with a new thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Logan Wilson (verified owner) –
I recently got my hands on a navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Lucas Wilson (verified owner) –
Finally replaced my old motor and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Harper White (verified owner) –
Disappointed in the telemetry module and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.
Henry Jones (verified owner) –
Just tried out the landing gear and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Isabella Hernandez (verified owner) –
I recently got my hands on a thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Evelyn Jones (verified owner) –
This might be the best foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Jacob Miller (verified owner) –
Been flying with a new GPS module and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Henry Rodriguez (verified owner) –
Swapped in a fresh gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.