Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR65-0305
Emma Miller (verified owner) –
Honestly surprised by this foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Noah Miller (verified owner) –
Just tried out the LED light strip and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Harper Miller (verified owner) –
Been flying with a new barometer and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Amelia Miller (verified owner) –
I recently got my hands on a antenna and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Amelia Taylor (verified owner) –
Just tried out the transmitter and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Isabella Miller (verified owner) –
Finally replaced my old charger and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Elijah Brown (verified owner) –
I recently got my hands on a altimeter and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Amelia Wilson (verified owner) –
This might be the best power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Amelia Davis (verified owner) –
After testing the telemetry module and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Henry Jones (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Ava Hernandez (verified owner) –
Finally replaced my old drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Emma Miller (verified owner) –
Decided to give this flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Noah Moore (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Logan Smith (verified owner) –
Been flying with a new battery strap and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Sophia Williams (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Jacob Miller (verified owner) –
Honestly surprised by this antenna and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Elijah Garcia (verified owner) –
Disappointed in the altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Mia Davis (verified owner) –
This might be the best battery strap and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Elijah Hernandez (verified owner) –
Finally replaced my old transmitter and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Emma Thompson (verified owner) –
This might be the best ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Evelyn Jackson (verified owner) –
Just tried out the gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Lucas Wilson (verified owner) –
Swapped in a fresh battery and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Mason Williams (verified owner) –
Honestly surprised by this ESC and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Amelia Thomas (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Mason Thomas (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Isabella Garcia (verified owner) –
I recently got my hands on a ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Sophia Williams (verified owner) –
Just tried out the transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Sophia Davis (verified owner) –
Upgraded to this heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Mason Smith (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Olivia Thompson (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Jacob Garcia (verified owner) –
Decided to give this gimbal and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Sophia Davis (verified owner) –
I recently got my hands on a barometer and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Benjamin Moore (verified owner) –
Swapped in a fresh charger and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Sophia Thomas (verified owner) –
Just tried out the barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. Perfect for anyone upgrading on a budget.
Elijah Rodriguez (verified owner) –
Disappointed in the servo and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Emma Martin (verified owner) –
Upgraded to this foldable arm and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Amelia Garcia (verified owner) –
Just tried out the servo and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Just what I needed for a quick fix.
Harper Taylor (verified owner) –
After testing the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
James Rodriguez (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Lucas Hernandez (verified owner) –
I recently got my hands on a camera mount and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. A must-have if you’re into serious aerial work.
Benjamin Martin (verified owner) –
Decided to give this frame arm and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Isabella Jackson (verified owner) –
Had my doubts about this flight controller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Jacob Miller (verified owner) –
Finally replaced my old charger and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Mason Jones (verified owner) –
After testing the frame arm and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Jacob Anderson (verified owner) –
Decided to give this propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.
Mason Miller (verified owner) –
Finally replaced my old power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.