On the shelf ready to ship!
Freshly rebuilt Honda Recon 250 powerplant.
Powersportsnation is now paying $100 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR250E-0215
Sophia Williams (verified owner) –
Had my doubts about this receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Evelyn Jones (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Emma Martin (verified owner) –
Just tried out the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. Would recommend to fellow builders without hesitation.
Noah Rodriguez (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Logan Smith (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Might look for a higher-end version next time.
Amelia Davis (verified owner) –
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Amelia Wilson (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Olivia Rodriguez (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Emma Garcia (verified owner) –
Had my doubts about this servo and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Benjamin Martin (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Ava Hernandez (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Charlotte Rodriguez (verified owner) –
Decided to give this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.
Elijah White (verified owner) –
Finally replaced my old motor and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Emma Garcia (verified owner) –
Upgraded to this vibration dampener and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Harper Johnson (verified owner) –
After testing the cooling fan and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Evelyn Anderson (verified owner) –
Finally replaced my old heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Lucas Brown (verified owner) –
Finally replaced my old carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Ava Jackson (verified owner) –
Had my doubts about this battery and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Isabella Williams (verified owner) –
This might be the best altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Elijah White (verified owner) –
Swapped in a fresh IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Jacob Wilson (verified owner) –
Had my doubts about this navigation light and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Isabella Martin (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Evelyn Martin (verified owner) –
This might be the best ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.