Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR420FM-1417
Elijah Brown (verified owner) –
This might be the best frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Isabella Taylor (verified owner) –
Upgraded to this GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Olivia Anderson (verified owner) –
Been flying with a new propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Not sure I’d buy this again, but it does the job.
Liam Williams (verified owner) –
Decided to give this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Henry Johnson (verified owner) –
Had my doubts about this LED light strip and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Elijah Martinez (verified owner) –
Finally replaced my old servo and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Olivia Williams (verified owner) –
Upgraded to this camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Mia Garcia (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Henry Johnson (verified owner) –
Been flying with a new battery and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Isabella Hernandez (verified owner) –
Finally replaced my old transmitter and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Emma Moore (verified owner) –
Been flying with a new camera mount and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Logan Garcia (verified owner) –
Just tried out the battery strap and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Elijah Smith (verified owner) –
After testing the IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Olivia Jackson (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Elijah Rodriguez (verified owner) –
Finally replaced my old camera mount and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Noah Miller (verified owner) –
Had my doubts about this propeller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Sophia Thompson (verified owner) –
Been flying with a new drone shell and took it out for a spin. Really improved my drone’s handling and responsiveness. Perfect for anyone upgrading on a budget.
Mason Moore (verified owner) –
This might be the best barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Liam Martin (verified owner) –
This might be the best foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Lucas Davis (verified owner) –
Been flying with a new gimbal and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Benjamin Garcia (verified owner) –
This might be the best motor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Noah Thomas (verified owner) –
After testing the ESC and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Emma Williams (verified owner) –
Upgraded to this barometer and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.