Freshly rebuilt Honda Rancher 420 (20-23) powerplant with a manually-shifted, four-wheel drive transmission.We offer a $200 core refund when you return your used engine to us (free of charge!)- return instructions included in the packaging.PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR420FM-2023
Emma White (verified owner) –
Just tried out the flight controller and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.
Jacob Moore (verified owner) –
Honestly surprised by this GPS module and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Charlotte Williams (verified owner) –
Been flying with a new thrust stand and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.
Mason Jones (verified owner) –
After testing the GPS module and took it out for a spin. The performance boost was immediately noticeable. Would recommend to fellow builders without hesitation.
Logan Moore (verified owner) –
Just tried out the receiver and took it out for a spin. It brought a level of stability I didn’t expect at this price. Will be sticking with this brand from now on.
Emma Taylor (verified owner) –
Finally replaced my old camera mount and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Isabella White (verified owner) –
This might be the best receiver and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Harper Miller (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Noah White (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Would recommend to fellow builders without hesitation.
Lucas Rodriguez (verified owner) –
Swapped in a fresh barometer and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Amelia Rodriguez (verified owner) –
Swapped in a fresh battery and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Henry Garcia (verified owner) –
Been flying with a new servo and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Mason Rodriguez (verified owner) –
Finally replaced my old antenna and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Logan Rodriguez (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Lucas Rodriguez (verified owner) –
Had my doubts about this LED light strip and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Lucas Martin (verified owner) –
Been flying with a new GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Evelyn Wilson (verified owner) –
Just tried out the LED light strip and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
James Rodriguez (verified owner) –
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Charlotte White (verified owner) –
Honestly surprised by this ESC and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Sophia Thomas (verified owner) –
Just tried out the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Amelia Thomas (verified owner) –
Finally replaced my old battery and took it out for a spin. There were no compatibility issues with my existing build. Not sure I’d buy this again, but it does the job.
Noah Martinez (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Olivia Williams (verified owner) –
Been flying with a new GPS module and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Benjamin Thomas (verified owner) –
Disappointed in the heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Ava White (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Liam Thompson (verified owner) –
Swapped in a fresh ESC and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Noah Johnson (verified owner) –
Upgraded to this telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Elijah Jackson (verified owner) –
Finally replaced my old antenna and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Isabella Jackson (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Emma Jones (verified owner) –
Honestly surprised by this telemetry module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Ava Johnson (verified owner) –
Upgraded to this foldable arm and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Emma Thomas (verified owner) –
Upgraded to this battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Isabella Thomas (verified owner) –
Had my doubts about this flight controller and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Might look for a higher-end version next time.
Harper Jones (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Lucas Thompson (verified owner) –
Disappointed in the carbon fiber prop and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Sophia Taylor (verified owner) –
I recently got my hands on a gimbal and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Logan Anderson (verified owner) –
After testing the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Mason Garcia (verified owner) –
Decided to give this frame arm and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Emma Brown (verified owner) –
Been flying with a new drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Evelyn Miller (verified owner) –
Honestly surprised by this LED light strip and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Evelyn Smith (verified owner) –
Had my doubts about this heat sink and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Emma Garcia (verified owner) –
Just tried out the battery strap and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Benjamin Jones (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Good for beginners and casual flyers alike.
Elijah Johnson (verified owner) –
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Noah White (verified owner) –
Finally replaced my old battery and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Emma Rodriguez (verified owner) –
Swapped in a fresh cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.