Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-HR420FE-1213
Emma Thomas (verified owner) –
After testing the frame arm and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Liam Williams (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Emma Jackson (verified owner) –
I recently got my hands on a vibration dampener and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Noah White (verified owner) –
Decided to give this propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Harper Brown (verified owner) –
This might be the best motor and took it out for a spin. There were no compatibility issues with my existing build. Would recommend to fellow builders without hesitation.
Mason Jones (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Harper Thomas (verified owner) –
Been flying with a new GPS module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Ava Rodriguez (verified owner) –
Had my doubts about this drone shell and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Amelia White (verified owner) –
Decided to give this FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Sophia Johnson (verified owner) –
Had my doubts about this carbon fiber prop and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Lucas Rodriguez (verified owner) –
Honestly surprised by this ESC and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.
Charlotte Wilson (verified owner) –
Honestly surprised by this antenna and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Olivia Wilson (verified owner) –
Honestly surprised by this camera mount and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Emma Taylor (verified owner) –
Just tried out the landing gear and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Isabella Miller (verified owner) –
Just tried out the FPV camera and took it out for a spin. There were some minor issues, but overall it’s a decent option. Will be sticking with this brand from now on.
Lucas Hernandez (verified owner) –
Had my doubts about this GPS module and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Ava Williams (verified owner) –
I recently got my hands on a frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Benjamin Moore (verified owner) –
Finally replaced my old flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Harper Thompson (verified owner) –
Swapped in a fresh FPV camera and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Mason Wilson (verified owner) –
Been flying with a new gimbal and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Mia Hernandez (verified owner) –
Finally replaced my old motor and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Mason Miller (verified owner) –
Been flying with a new altimeter and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Sophia White (verified owner) –
I recently got my hands on a navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.