On the shelf ready to ship!
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-SXS700
Benjamin Anderson (verified owner) –
I recently got my hands on a thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Harper Wilson (verified owner) –
I recently got my hands on a frame arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.
Elijah Taylor (verified owner) –
Just tried out the cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Benjamin Hernandez (verified owner) –
Decided to give this battery and took it out for a spin. It’s a reliable component, though not the most innovative. It saved my drone from a total rebuild.
Harper Jones (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
James Wilson (verified owner) –
This might be the best landing gear and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Mason Martin (verified owner) –
This might be the best carbon fiber prop and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Lucas Davis (verified owner) –
Honestly surprised by this battery strap and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Ava Anderson (verified owner) –
Swapped in a fresh receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Lucas Wilson (verified owner) –
Just tried out the landing gear and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Logan Garcia (verified owner) –
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Noah Rodriguez (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Mason Davis (verified owner) –
Swapped in a fresh vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Lucas Williams (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Henry Wilson (verified owner) –
Just tried out the LED light strip and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Sophia Taylor (verified owner) –
Had my doubts about this drone shell and took it out for a spin. Really improved my drone’s handling and responsiveness. Just what I needed for a quick fix.
Logan Williams (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Charlotte Thomas (verified owner) –
Been flying with a new receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Mia Martinez (verified owner) –
Been flying with a new drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Harper Jackson (verified owner) –
Finally replaced my old propeller and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Sophia Anderson (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Jacob Garcia (verified owner) –
Swapped in a fresh barometer and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Harper White (verified owner) –
This might be the best altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Just what I needed for a quick fix.