On the shelf ready to ship!
Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-TRX500-1518
Logan Rodriguez (verified owner) –
Disappointed in the charger and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Logan Anderson (verified owner) –
Been flying with a new gimbal and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Henry Rodriguez (verified owner) –
This might be the best cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Sophia Williams (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Olivia Martin (verified owner) –
Honestly surprised by this LED light strip and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Noah Davis (verified owner) –
Had my doubts about this barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Lucas Williams (verified owner) –
Finally replaced my old navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Mason Smith (verified owner) –
Decided to give this flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Would recommend to fellow builders without hesitation.
Liam Rodriguez (verified owner) –
Finally replaced my old gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Ava Smith (verified owner) –
Honestly surprised by this telemetry module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Evelyn Anderson (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Harper Martinez (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Mason Moore (verified owner) –
Swapped in a fresh barometer and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
James Anderson (verified owner) –
Just tried out the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Amelia Rodriguez (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Evelyn Smith (verified owner) –
Finally replaced my old navigation light and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Sophia White (verified owner) –
Just tried out the thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Olivia Thompson (verified owner) –
Finally replaced my old vibration dampener and took it out for a spin. The performance boost was immediately noticeable. Might look for a higher-end version next time.
Amelia Garcia (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Ava Williams (verified owner) –
Been flying with a new barometer and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Mia Garcia (verified owner) –
I recently got my hands on a barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. It saved my drone from a total rebuild.
Sophia Jackson (verified owner) –
Been flying with a new barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Will be sticking with this brand from now on.
Lucas Brown (verified owner) –
Finally replaced my old propeller and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. It saved my drone from a total rebuild.