Freshly rebuilt Honda Foreman 520 powerplant with manually-shifted transmission.We offer a $200-400 core refund when you return your used engine to us (free of charge!)- return instructions included in packaging.PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-FR520FM-2022
Jacob Thomas (verified owner) –
Disappointed in the cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Charlotte White (verified owner) –
Decided to give this power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Noah Moore (verified owner) –
I recently got my hands on a navigation light and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Logan Martin (verified owner) –
Just tried out the thrust stand and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Jacob Moore (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Mason Thompson (verified owner) –
Just tried out the power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Logan Martinez (verified owner) –
After testing the heat sink and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Mia Thompson (verified owner) –
Swapped in a fresh frame arm and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Mia Jackson (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Ava Johnson (verified owner) –
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Elijah Rodriguez (verified owner) –
Been flying with a new heat sink and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Isabella White (verified owner) –
Swapped in a fresh IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Might look for a higher-end version next time.
Liam Martin (verified owner) –
I recently got my hands on a FPV camera and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Ava Hernandez (verified owner) –
Just tried out the gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Just what I needed for a quick fix.
Jacob Garcia (verified owner) –
Disappointed in the motor and took it out for a spin. Really improved my drone’s handling and responsiveness. A must-have if you’re into serious aerial work.
Benjamin Anderson (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Benjamin Anderson (verified owner) –
Upgraded to this propeller and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Liam Johnson (verified owner) –
This might be the best drone shell and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Lucas Smith (verified owner) –
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Emma Garcia (verified owner) –
Decided to give this propeller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.
Mia Jackson (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Olivia Davis (verified owner) –
Decided to give this charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Just what I needed for a quick fix.
Amelia White (verified owner) –
Had my doubts about this battery and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.