Freshly rebuilt Can-Am Outlander 1000 12-17 powerplant- also fits Renegade 1000 12-15.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-420101010
Harper Williams (verified owner) –
Been flying with a new landing gear and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Good for beginners and casual flyers alike.
Henry Smith (verified owner) –
Decided to give this gimbal and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Sophia Jackson (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Evelyn Martin (verified owner) –
Honestly surprised by this FPV camera and took it out for a spin. It’s a reliable component, though not the most innovative. Good for beginners and casual flyers alike.
Ava Smith (verified owner) –
I recently got my hands on a charger and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
James Johnson (verified owner) –
Swapped in a fresh flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Benjamin Davis (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Benjamin Garcia (verified owner) –
Upgraded to this receiver and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
James Davis (verified owner) –
Upgraded to this thrust stand and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Liam Johnson (verified owner) –
Swapped in a fresh heat sink and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Might look for a higher-end version next time.
Noah Martinez (verified owner) –
Decided to give this landing gear and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Benjamin Thomas (verified owner) –
Disappointed in the GPS module and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Benjamin Anderson (verified owner) –
Just tried out the LED light strip and took it out for a spin. There were some minor issues, but overall it’s a decent option. It saved my drone from a total rebuild.
Lucas Brown (verified owner) –
Decided to give this altimeter and took it out for a spin. Really improved my drone’s handling and responsiveness. Might look for a higher-end version next time.
Henry Jones (verified owner) –
I recently got my hands on a ESC and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
James Davis (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Charlotte Smith (verified owner) –
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Noah Thomas (verified owner) –
Just tried out the transmitter and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.
Charlotte Wilson (verified owner) –
Honestly surprised by this drone shell and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Mia Rodriguez (verified owner) –
Had my doubts about this cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Logan Jackson (verified owner) –
Upgraded to this telemetry module and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Mason Anderson (verified owner) –
Honestly surprised by this battery and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Mason Martin (verified owner) –
Finally replaced my old foldable arm and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Not sure I’d buy this again, but it does the job.