23 reviews for ARCTIC CAT WILDCAT XX RG XT EPS 18 PANEL CARGO LEFT REAR 8506-373 47883
Rated 3 out of 5
Amelia Rodriguez (verified owner)–
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Rated 5 out of 5
Henry Hernandez (verified owner)–
Just tried out the landing gear and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Rated 4 out of 5
Mason Thomas (verified owner)–
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Rated 4 out of 5
Olivia Davis (verified owner)–
Finally replaced my old charger and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Rated 5 out of 5
Isabella Smith (verified owner)–
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Rated 3 out of 5
Ava Garcia (verified owner)–
Honestly surprised by this drone shell and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Rated 5 out of 5
Harper Jackson (verified owner)–
Been flying with a new thrust stand and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Rated 3 out of 5
Isabella Martin (verified owner)–
Just tried out the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Rated 3 out of 5
Sophia Rodriguez (verified owner)–
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Rated 5 out of 5
Sophia Thomas (verified owner)–
Had my doubts about this thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Rated 5 out of 5
Benjamin Martin (verified owner)–
Decided to give this carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Rated 3 out of 5
Lucas Thompson (verified owner)–
Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Rated 3 out of 5
Noah Martinez (verified owner)–
Just tried out the power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Rated 5 out of 5
Benjamin Davis (verified owner)–
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Rated 4 out of 5
Benjamin Martinez (verified owner)–
Finally replaced my old navigation light and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Rated 5 out of 5
Benjamin Martinez (verified owner)–
I recently got my hands on a ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Rated 3 out of 5
Lucas Davis (verified owner)–
Honestly surprised by this drone shell and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Rated 4 out of 5
Ava Jackson (verified owner)–
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Rated 3 out of 5
Mia Taylor (verified owner)–
Been flying with a new flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Rated 5 out of 5
Benjamin Garcia (verified owner)–
I recently got my hands on a power distribution board and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Rated 5 out of 5
Amelia Jones (verified owner)–
Disappointed in the cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Rated 5 out of 5
Benjamin Jones (verified owner)–
Upgraded to this servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Rated 4 out of 5
Mason Thomas (verified owner)–
Disappointed in the LED light strip and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Amelia Rodriguez (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Henry Hernandez (verified owner) –
Just tried out the landing gear and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Mason Thomas (verified owner) –
Disappointed in the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Olivia Davis (verified owner) –
Finally replaced my old charger and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Isabella Smith (verified owner) –
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Ava Garcia (verified owner) –
Honestly surprised by this drone shell and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. A must-have if you’re into serious aerial work.
Harper Jackson (verified owner) –
Been flying with a new thrust stand and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Isabella Martin (verified owner) –
Just tried out the barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Sophia Rodriguez (verified owner) –
Disappointed in the power distribution board and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Sophia Thomas (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Would recommend to fellow builders without hesitation.
Benjamin Martin (verified owner) –
Decided to give this carbon fiber prop and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Lucas Thompson (verified owner) –
Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.
Noah Martinez (verified owner) –
Just tried out the power distribution board and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Benjamin Davis (verified owner) –
Decided to give this IMU sensor and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Benjamin Martinez (verified owner) –
Finally replaced my old navigation light and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Not sure I’d buy this again, but it does the job.
Benjamin Martinez (verified owner) –
I recently got my hands on a ESC and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.
Lucas Davis (verified owner) –
Honestly surprised by this drone shell and took it out for a spin. There were no compatibility issues with my existing build. Might look for a higher-end version next time.
Ava Jackson (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Mia Taylor (verified owner) –
Been flying with a new flight controller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Benjamin Garcia (verified owner) –
I recently got my hands on a power distribution board and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Amelia Jones (verified owner) –
Disappointed in the cooling fan and took it out for a spin. Really improved my drone’s handling and responsiveness. It saved my drone from a total rebuild.
Benjamin Jones (verified owner) –
Upgraded to this servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Mason Thomas (verified owner) –
Disappointed in the LED light strip and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.