On the shelf ready to ship!
Freshly rebuilt Kawasaki Brute Force 750 powerplant.
Powersportsnation is now paying $500 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-BF750-1519
Ava Jackson (verified owner) –
After testing the battery strap and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Olivia Smith (verified owner) –
Honestly surprised by this transmitter and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.
Emma Martin (verified owner) –
Decided to give this propeller and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Charlotte Moore (verified owner) –
Been flying with a new thrust stand and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Liam Williams (verified owner) –
Had my doubts about this barometer and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Mason Davis (verified owner) –
Disappointed in the vibration dampener and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Lucas Taylor (verified owner) –
Decided to give this battery strap and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.
Elijah Smith (verified owner) –
This might be the best cooling fan and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Charlotte Rodriguez (verified owner) –
Had my doubts about this servo and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Sophia Anderson (verified owner) –
Disappointed in the frame arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Isabella Jones (verified owner) –
Finally replaced my old servo and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Logan Thompson (verified owner) –
After testing the LED light strip and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Perfect for anyone upgrading on a budget.
Noah White (verified owner) –
Swapped in a fresh receiver and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Lucas Wilson (verified owner) –
Upgraded to this foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Olivia Miller (verified owner) –
Decided to give this camera mount and took it out for a spin. There were some minor issues, but overall it’s a decent option. Would recommend to fellow builders without hesitation.
Isabella Miller (verified owner) –
Had my doubts about this antenna and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Noah Williams (verified owner) –
Decided to give this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Jacob Moore (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Logan Smith (verified owner) –
This might be the best IMU sensor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Sophia Williams (verified owner) –
After testing the IMU sensor and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.
Emma Thompson (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Lucas Wilson (verified owner) –
Finally replaced my old propeller and took it out for a spin. It’s a reliable component, though not the most innovative. Will be sticking with this brand from now on.
Benjamin Hernandez (verified owner) –
Disappointed in the heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.