POLARIS RZR 900 XP 11-12 LONG BLOCK ENGINE MOTOR REBUILT IN STOCK READY TO SHIP

(23 customer reviews)

$3,999.99

Store Availability:

Ready to Ship! No wait time! Core Required

Category:

On the shelf ready to ship!
Freshly rebuilt Polaris RZR 900 11-12 Long Block powerplant.Now comes with new intake boots.
Powersportsnation is now paying $300 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)

Part Number:

PSN0100-2204635-LB

23 reviews for POLARIS RZR 900 XP 11-12 LONG BLOCK ENGINE MOTOR REBUILT IN STOCK READY TO SHIP

  1. Olivia Garcia (verified owner)

    Just tried out the transmitter and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.

  2. Olivia Williams (verified owner)

    Just tried out the telemetry module and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. It saved my drone from a total rebuild.

  3. Noah Miller (verified owner)

    Had my doubts about this battery and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Perfect for anyone upgrading on a budget.

  4. Henry Wilson (verified owner)

    Upgraded to this telemetry module and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.

  5. Emma Brown (verified owner)

    After testing the carbon fiber prop and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.

  6. Ava Smith (verified owner)

    Just tried out the transmitter and took it out for a spin. The performance boost was immediately noticeable. Will be sticking with this brand from now on.

  7. James Wilson (verified owner)

    This might be the best frame arm and took it out for a spin. The performance boost was immediately noticeable. Just what I needed for a quick fix.

  8. Liam Anderson (verified owner)

    Upgraded to this telemetry module and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.

  9. Olivia Jackson (verified owner)

    Upgraded to this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Definitely a worthwhile upgrade.

  10. Lucas Moore (verified owner)

    Honestly surprised by this foldable arm and took it out for a spin. It’s a reliable component, though not the most innovative. Not sure I’d buy this again, but it does the job.

  11. Sophia Thomas (verified owner)

    Finally replaced my old GPS module and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.

  12. Lucas Taylor (verified owner)

    Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.

  13. Mason White (verified owner)

    Just tried out the drone shell and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.

  14. James Martinez (verified owner)

    Swapped in a fresh battery and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.

  15. Charlotte Smith (verified owner)

    Just tried out the gimbal and took it out for a spin. The performance boost was immediately noticeable. It saved my drone from a total rebuild.

  16. Mason Martin (verified owner)

    Just tried out the flight controller and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.

  17. Charlotte Taylor (verified owner)

    Just tried out the IMU sensor and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.

  18. Elijah Hernandez (verified owner)

    After testing the carbon fiber prop and took it out for a spin. It’s a reliable component, though not the most innovative. Just what I needed for a quick fix.

  19. Liam Williams (verified owner)

    I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.

  20. Benjamin Johnson (verified owner)

    I recently got my hands on a foldable arm and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.

  21. Mia Martin (verified owner)

    Honestly surprised by this ESC and took it out for a spin. There were no compatibility issues with my existing build. Will be sticking with this brand from now on.

  22. Mia Thompson (verified owner)

    Disappointed in the vibration dampener and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.

  23. James Jackson (verified owner)

    Swapped in a fresh telemetry module and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.

Add a review

Your email address will not be published. Required fields are marked *