Freshly rebuilt Can-Am Outlander 570 18-23 650 16-23 Renegade 650 18-23 powerplant.
Powersportsnation is now paying $200 for your core. If it has a hole in it, if it has been disassembled or is locked up you will get 50% of this core value. We provide a return label to bring back the core free of charge to you. Please call for the return label.
PowerSportsNation Rebuilt Engines.
Our process:
-Engines are completely disassembled. Cases are hot tanked or pressure washed.
-All rebuilt engines include new piston(s) and rings, new gaskets and seals, new timing chain (where applicable), water pump seal kit (if water pump is part of assembly), new oil filter, and new spark plug(s).
-Heads are refreshed or rebuilt (on a Rottler Head Machine SG7MTS) with the valves adjusted. All heads are checked for trueness and surfaced or planed if necessary. All valves, guides and seats are checked and replaced if needed.
-Cylinders are always overbored to the next size or sent off and replated.
-Crankshafts are inspected. If they are not in excellent or near new condition, they are rebuilt or replaced. If automotive style crank and rods are used in the application, all bearings are replaced. Crankshaft roller bearings are replaced where needed.
-Transmissions (where applicable). All parts are visibly inspected or measured for wear. All bearings, shift forks and gears are replaced where needed. Any other worn internals will be replaced where needed.
-Oil pumps are a crucial component in the build. They are all torn down and inspected. If they don’t appear to be near new, they will be rebuilt or replaced.
-Assembly begins after all parts are inspected and the replacement parts are on hand. Each engine is hand built with quality workmanship to insure the longevity of your powerplant. All bolts are torqued to appropriate specs for each engine type.
-The final step in the process here at PSN is to test run your engine. Because of the vast inventory of used parts from our salvage operation we have been able to build test cradles or test rollers. We run 9 out of 10 engines that leave our facility. And are continuing to build towards 100% testing. This helps us catch any issues before they make it to the customer.
-Our warranty, in the event that you have an issue. All Sport quads (Ex: YFZ450 or scrambler) or sport side by sides (Ex: RZR) engines carry a 90-day warranty. All Utility ATV and UTV engines carry a 180-day warranty. The first 90 days of warranty covers parts or exchange and labor (max labor coverage-$500, if installed by a professional shop in the industry). The second 90 days covers parts or exchange only. (Excludes sport quads and sport side by sides)
Part Number:
PSN0100-420066050
Olivia Rodriguez (verified owner) –
Honestly surprised by this motor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Logan Smith (verified owner) –
Just tried out the drone shell and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Would recommend to fellow builders without hesitation.
Emma Williams (verified owner) –
Decided to give this vibration dampener and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Good for beginners and casual flyers alike.
Jacob Rodriguez (verified owner) –
Disappointed in the altimeter and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Might look for a higher-end version next time.
Benjamin Johnson (verified owner) –
Disappointed in the flight controller and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Just what I needed for a quick fix.
Henry Davis (verified owner) –
Swapped in a fresh barometer and took it out for a spin. It’s a reliable component, though not the most innovative. Perfect for anyone upgrading on a budget.
Liam Martinez (verified owner) –
Finally replaced my old frame arm and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Elijah Anderson (verified owner) –
Been flying with a new GPS module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Good for beginners and casual flyers alike.
Logan Rodriguez (verified owner) –
This might be the best FPV camera and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Mason Anderson (verified owner) –
Decided to give this navigation light and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Emma Rodriguez (verified owner) –
I recently got my hands on a transmitter and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Liam Garcia (verified owner) –
Just tried out the cooling fan and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Elijah Jackson (verified owner) –
Finally replaced my old camera mount and took it out for a spin. It brought a level of stability I didn’t expect at this price. Definitely a worthwhile upgrade.
Liam Thompson (verified owner) –
Finally replaced my old IMU sensor and took it out for a spin. The performance boost was immediately noticeable. Good for beginners and casual flyers alike.
Olivia White (verified owner) –
Honestly surprised by this telemetry module and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Perfect for anyone upgrading on a budget.
Ava White (verified owner) –
Just tried out the flight controller and took it out for a spin. Really improved my drone’s handling and responsiveness. Not sure I’d buy this again, but it does the job.
Sophia Rodriguez (verified owner) –
This might be the best charger and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Evelyn Anderson (verified owner) –
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Elijah Smith (verified owner) –
After testing the ESC and took it out for a spin. It brought a level of stability I didn’t expect at this price. A must-have if you’re into serious aerial work.
Emma Thomas (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Benjamin Anderson (verified owner) –
Finally replaced my old barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. A must-have if you’re into serious aerial work.
Lucas Taylor (verified owner) –
Just tried out the motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Noah Williams (verified owner) –
I recently got my hands on a foldable arm and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Logan Williams (verified owner) –
Had my doubts about this barometer and took it out for a spin. There were no compatibility issues with my existing build. Definitely a worthwhile upgrade.
Charlotte Rodriguez (verified owner) –
Honestly surprised by this IMU sensor and took it out for a spin. There were no compatibility issues with my existing build. A must-have if you’re into serious aerial work.
Mason Garcia (verified owner) –
Swapped in a fresh gimbal and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Mia Taylor (verified owner) –
This might be the best thrust stand and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Henry Smith (verified owner) –
Swapped in a fresh carbon fiber prop and took it out for a spin. There were no compatibility issues with my existing build. Perfect for anyone upgrading on a budget.
Isabella Taylor (verified owner) –
Just tried out the foldable arm and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Definitely a worthwhile upgrade.
Liam Davis (verified owner) –
Swapped in a fresh altimeter and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Good for beginners and casual flyers alike.
Sophia White (verified owner) –
Decided to give this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Just what I needed for a quick fix.
Elijah Thompson (verified owner) –
Upgraded to this carbon fiber prop and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. It saved my drone from a total rebuild.
Lucas Hernandez (verified owner) –
Honestly surprised by this motor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Will be sticking with this brand from now on.
Liam Hernandez (verified owner) –
Disappointed in the vibration dampener and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Henry Jones (verified owner) –
Finally replaced my old battery strap and took it out for a spin. There were no compatibility issues with my existing build. Just what I needed for a quick fix.
Evelyn Jackson (verified owner) –
Honestly surprised by this antenna and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
James Davis (verified owner) –
I recently got my hands on a barometer and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
Elijah Martin (verified owner) –
Upgraded to this IMU sensor and took it out for a spin. It brought a level of stability I didn’t expect at this price. It saved my drone from a total rebuild.
Liam Davis (verified owner) –
Swapped in a fresh antenna and took it out for a spin. Really improved my drone’s handling and responsiveness. Good for beginners and casual flyers alike.
Lucas Taylor (verified owner) –
Had my doubts about this thrust stand and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. A must-have if you’re into serious aerial work.
Charlotte Wilson (verified owner) –
Swapped in a fresh frame arm and took it out for a spin. The performance boost was immediately noticeable. Perfect for anyone upgrading on a budget.
Amelia Taylor (verified owner) –
Decided to give this barometer and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Definitely a worthwhile upgrade.
Amelia Jones (verified owner) –
Upgraded to this battery strap and took it out for a spin. Really improved my drone’s handling and responsiveness. Will be sticking with this brand from now on.
Jacob Thomas (verified owner) –
Finally replaced my old heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Isabella Jones (verified owner) –
Just tried out the motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Isabella Williams (verified owner) –
Just tried out the landing gear and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.