23 reviews for YAMAHA RHINO 660 SPORT 07 HOOD 5UG-F1510-C0-00 42063
Rated 5 out of 5
Noah White (verified owner)–
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Rated 3 out of 5
Amelia Thompson (verified owner)–
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Rated 5 out of 5
Elijah Jackson (verified owner)–
Decided to give this heat sink and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Rated 3 out of 5
Charlotte Smith (verified owner)–
Had my doubts about this frame arm and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Rated 4 out of 5
Jacob Miller (verified owner)–
Had my doubts about this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Rated 4 out of 5
Lucas Thompson (verified owner)–
Been flying with a new receiver and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Rated 3 out of 5
Liam Thompson (verified owner)–
Upgraded to this servo and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
Rated 3 out of 5
James Anderson (verified owner)–
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Rated 4 out of 5
Mason Miller (verified owner)–
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Rated 3 out of 5
James Anderson (verified owner)–
After testing the gimbal and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Rated 5 out of 5
Ava Anderson (verified owner)–
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Rated 4 out of 5
Ava Smith (verified owner)–
Just tried out the carbon fiber prop and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Rated 3 out of 5
Henry Hernandez (verified owner)–
Decided to give this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Rated 5 out of 5
Liam Anderson (verified owner)–
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Rated 3 out of 5
Mia Taylor (verified owner)–
Just tried out the carbon fiber prop and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Rated 5 out of 5
Mia Jones (verified owner)–
This might be the best IMU sensor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Rated 4 out of 5
Amelia Smith (verified owner)–
Finally replaced my old heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Rated 3 out of 5
Mia Jackson (verified owner)–
This might be the best foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Rated 4 out of 5
Charlotte White (verified owner)–
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Rated 3 out of 5
Harper Taylor (verified owner)–
Had my doubts about this servo and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Rated 3 out of 5
Mia Hernandez (verified owner)–
I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Rated 5 out of 5
Charlotte Rodriguez (verified owner)–
Finally replaced my old antenna and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Rated 4 out of 5
Olivia Jackson (verified owner)–
Just tried out the motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.
Noah White (verified owner) –
Disappointed in the propeller and took it out for a spin. The performance boost was immediately noticeable. Definitely a worthwhile upgrade.
Amelia Thompson (verified owner) –
Upgraded to this heat sink and took it out for a spin. It brought a level of stability I didn’t expect at this price. Might look for a higher-end version next time.
Elijah Jackson (verified owner) –
Decided to give this heat sink and took it out for a spin. The performance boost was immediately noticeable. Not sure I’d buy this again, but it does the job.
Charlotte Smith (verified owner) –
Had my doubts about this frame arm and took it out for a spin. The performance boost was immediately noticeable. A must-have if you’re into serious aerial work.
Jacob Miller (verified owner) –
Had my doubts about this telemetry module and took it out for a spin. There were some minor issues, but overall it’s a decent option. Definitely a worthwhile upgrade.
Lucas Thompson (verified owner) –
Been flying with a new receiver and took it out for a spin. There were some minor issues, but overall it’s a decent option. Perfect for anyone upgrading on a budget.
Liam Thompson (verified owner) –
Upgraded to this servo and took it out for a spin. It brought a level of stability I didn’t expect at this price. Not sure I’d buy this again, but it does the job.
James Anderson (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Mason Miller (verified owner) –
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
James Anderson (verified owner) –
After testing the gimbal and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Perfect for anyone upgrading on a budget.
Ava Anderson (verified owner) –
After testing the power distribution board and took it out for a spin. It brought a level of stability I didn’t expect at this price. Just what I needed for a quick fix.
Ava Smith (verified owner) –
Just tried out the carbon fiber prop and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Henry Hernandez (verified owner) –
Decided to give this IMU sensor and took it out for a spin. The part felt solid and handled multiple test flights flawlessly. Will be sticking with this brand from now on.
Liam Anderson (verified owner) –
I recently got my hands on a landing gear and took it out for a spin. There were no compatibility issues with my existing build. It saved my drone from a total rebuild.
Mia Taylor (verified owner) –
Just tried out the carbon fiber prop and took it out for a spin. Really improved my drone’s handling and responsiveness. Would recommend to fellow builders without hesitation.
Mia Jones (verified owner) –
This might be the best IMU sensor and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Not sure I’d buy this again, but it does the job.
Amelia Smith (verified owner) –
Finally replaced my old heat sink and took it out for a spin. I’ve pushed it hard in windy weather and it hasn’t let me down. Might look for a higher-end version next time.
Mia Jackson (verified owner) –
This might be the best foldable arm and took it out for a spin. Really improved my drone’s handling and responsiveness. Definitely a worthwhile upgrade.
Charlotte White (verified owner) –
This might be the best heat sink and took it out for a spin. It’s been holding up incredibly well, even in rough conditions. Not sure I’d buy this again, but it does the job.
Harper Taylor (verified owner) –
Had my doubts about this servo and took it out for a spin. Had a bit of trouble with the setup, but it paid off in the air. Would recommend to fellow builders without hesitation.
Mia Hernandez (verified owner) –
I recently got my hands on a drone shell and took it out for a spin. It’s a reliable component, though not the most innovative. A must-have if you’re into serious aerial work.
Charlotte Rodriguez (verified owner) –
Finally replaced my old antenna and took it out for a spin. There were no compatibility issues with my existing build. Good for beginners and casual flyers alike.
Olivia Jackson (verified owner) –
Just tried out the motor and took it out for a spin. It brought a level of stability I didn’t expect at this price. Good for beginners and casual flyers alike.